LS200-MF8-US915
902–928 MHz

LS200-MF8-US915
US915 20dbm
AS923 16dbm (optional)
AU915 20dbm (optional)
KR920 14dbm (optional)

Humidity Sensor Information
　Measurement Range: 0% RH to 100% RH
　Measurement Accuracy: ±7%RH

Passive Infrared Sensor Information
　Detectable Angle: 80° horizontally / 55° vertically
　Detectable Range: 3m to 5m

Light Sensor Information
　Illumination Measurement Range: 1 Lux to 3000 Lux
　Illumination Measurement Accuracy: <15%

Tilt Sensor Information
　Conversion Angle: 45±5 degrees
　Contact Resistance: Less than 10 ohms
　The Insulation Resistance: Greater than 100 megohms
　Operating Temperature: -40°C to 85 °C
　Installation Type: Suitable for PCB at vertical state

Vibration Sensor Information
　Model: Ball type omnidirectional signal trigger switch
　Voltage: <6V
　Current: 2uA to 10mA
　Insulation Resistance: >10M Ω
　Trigger Rate: 100% (amplitude > 1 mm, frequency > 20 Hz)
　Trigger Frequency: >50Hz

Reed Switch Sensor Information
　Minimum Insulation Resistance 10^10 Ω
　Maximum Contact Resistance 100m Ω
　Maximum Switching Current 0.5A

Glass Break Sensor Information
　Detection Mode: Piezoelectric buzzer
　Power Supply: Self-generated voltage chip
　Impedance: Normal (NC): 7Ω (max) Alarm (NO): 1MΩ (min)
　Sensor Sensing Range: within 2.5M radius
　Signal Sensing Time: 1-3 seconds
　Loop Voltage: 15VDC (max)
　Loop Current: 25mA (max)
　Operating Temperature: -10 to 50 °C
　Wire Length: 100cm